Show System Boot-Messages - Juniper JUNOS OS 10.3 - SOFTWARE Manual

Complete Software Guide for Junos

show system boot-messages

Syntax
Syntax (EX Series
Switch)
Syntax (TX Matrix
Router)
Syntax (TX Matrix Plus
Router)
Release Information
Description
Options
132
®
OS for EX Series Ethernet Switches, Release 10.3
show system boot-messages
show system boot-messages
<all-members>
<local>
<member member-id>
show system boot-messages
<all-chassis | all-lcc | lcc number | scc>
show system boot-messages
<all-chassis | all-lcc | lcc number | sfc number>
Command introduced before Junos OS Release 7.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
sfc option introduced for the TX Matrix Plus router in Junos OS Release 9.6.
Display initial messages generated by the system kernel upon startup. These messages
are the contents of
/var/run/dmesg.boot
none —Display all boot time messages.
—(TX Matrix and TX Matrix Plus routers only) (Optional) Display boot time
all-chassis
messages for all of the chassis.
all-lcc —(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
display boot time messages for all T640 routers (or line-card chassis) connected
to a TX Matrix router. On a TX Matrix Plus router, display boot time messages for all
T1600 routers (or line-card chassis) connected to a TX Matrix Plus router.
all-members —(EX4200 switches only) (Optional) Display boot time messages on all
members of the Virtual Chassis configuration.
—(TX Matrix and TX Matrix Plus routers only) (Optional) On a TX Matrix router,
lcc number
display boot time messages for a specific T640 router connected to a TX Matrix
router. On a TX Matrix Plus router, display boot time messages for a specific T1600
router connected to a TX Matrix Plus router.Replace
through .
0 3
local —(EX4200 switches only) (Optional) Display boot time messages on the local
Virtual Chassis member.
—(EX4200 switches only) (Optional) Display boot time messages
member member-id
on the specified member of the Virtual Chassis configuration. Replace
with a value from 0 through 9.
—(TX Matrix routers only) (Optional) Display boot time messages for the TX Matrix
scc
router (or switch-card chassis).
.
number with a value from from
Copyright © 2010, Juniper Networks, Inc.
member-id