Boot System - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE A TO M 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide A to M

boot system

Syntax
Release Information
Description
Options
Mode
306
boot system relFileName
Command introduced before JunosE Release 7.1.0.
Specifies the software release (.rel) file to use on reboot. There is no no version.
NOTE: In a dual SRP module configuration, when this information is
synchronized to the standby SRP module, the standby SRP module is reloaded
to boot the specified release. The high availability feature requires the release
to be the same on the active and the standby SRP modules. This means that
arming the system to boot with a different release causes the standby module
to reload and prevent high availability from becoming active or to disable
high availability if it is active or pending.
relFileName—Name of the software release file (.rel) that contains the software release
Global Configuration
Copyright © 2010, Juniper Networks, Inc.