Table of Contents
Advertisement
show hdlc interface
show hdlc interface [ { dataRestriction [ dataRestriction ]* } | full ]
Syntax
[ delta ] [ stateRestriction ] [ { interfaceType } interfaceSpecifier ] [ filter ]
Command introduced before JUNOSe Release 7.1.0.
Release Information
Displays statistics about specified Cisco HDLC interfaces.
Description
Options
Privileged Exec, User Exec
Mode
dataRestriction Specify one or more of the following keywords:
config Displays information about the HDLC interface configuration
status Displays information about the HDLC interface operational status
statistics Displays information about the HDLC interface statistics
* Indicates that one or more parameters can be repeated multiple times in a
list in the command line
full Displays configuration, status, and statistics information; equivalent to
specifying config status statistics
delta Displays baselined statistics
stateRestriction Specify only one of the following keywords:
open Displays an interface that is administratively enabled, which means
that the no ppp shutdown command is operational
closed Displays an interface that is administratively disabled, which means
that the ppp shutdown command is operational
up Displays an interface that is up, which means that the LCP has been
negotiated
down Displays an interface that is down, which means that the LCP has
not been negotiated, the negotiations have failed, or the connection has
been terminated
lower-layer-down Displays an interface that is not up and is waiting for the
lower layer to come up to initiate negotiations for LCP
not present Displays an interface on which traffic cannot flow because
hardware is unavailable
interfaceType Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
filter See Filtering show Commands on page 4
Chapter 7: S Commands
689
show hdlc interface
Advertisement
Table of Contents
