Lacp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
lacp
Syntax
Release Information
Description
Options
Mode
1200
lacp { active | passive }
no lacp
Command introduced before JunosE Release 7.1.0.
Configures whether an Ethernet link in an IEEE 802.3ad link aggregation group (LAG)
bundle participates actively or passively in the Link Aggregation Control Protocol (LACP).
LACP controls the transmission of protocol data units (PDUs) to exchange information
between partner links in a LAG bundle. By default, Ethernet links do not send LACP PDUs.
The no version restores the default behavior.
active—Causes the Ethernet link to always transmit LACP PDUs, regardless of whether
its partner link is set to active or passive LACP participation
passive—Causes the Ethernet link to transmit LACP PDUs only when it receives LACP
PDUs from its partner link
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers