Description; Display Atm Map-Info - H3C MSR810 Command Reference Manual

[Sysname-Virtual-Ethernet2/4/1] default

description

Use description to configure the description for an interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description for an interface is interface name Interface, for example, Virtual-Ethernet 2/4/1
Interface.
Views
VE interface view
VE subinterface view
Predefined user roles
network-admin
Parameters
text: Specifies the interface description, a case-sensitive string of 1 to 255 characters.
Examples
# Set the description for VE interface Virtual-Ethernet 2/4/1 to Virtual-Ethernet.
<Sysname> system-view
[Sysname] interface virtual-ethernet 2/4/1
[Sysname-Virtual-Ethernet2/4/1] description Virtual-Ethernet

display atm map-info

Use display atm map-info to display mapping information about PVCs or PVC-groups.
Syntax
display atm map-info [ interface interface-type { interface-number | interface-number.subnumber }
[ pvc { pvc-name | vpi/vci } | pvc-group group-number ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type { interface-number | interface-number.subnumber }: Specifies an interface
by its type and number. Both ATM interfaces and ATM subinterfaces are supported.
pvc: Displays mapping information for a PVC.
pvc-name: Specifies a P VC by its name, a c ase-sensitive string of 1 to 15 c haracters excluding
slashes (/) and hyphens (-). For example, neither 1/20 nor a-b is a valid PVC name.
196