Portal Auth-Error-Record Enable - H3C MSR Series Command Reference Manual

Comware 7 security
Hide thumbs Also See for MSR Series:
Table of Contents

Advertisement

Parameters
ipv6: Specifies an IPv6 portal Web server. If the server is an IPv4 portal Web server, do not specify
this keyword.
secondary: Specifies the backup portal Web server. If you do not specify this keyword, the specified
server is the primary portal Web server.
server-name: Specifies a portal Web server to be specified on the interface by its name, a
case-sensitive string of 1 to 32 characters. The name must already exist. If you do not specify a
server name in the undo form of this command, all portal Web servers on the interface or service
template are removed.
Usage guidelines
IPv4 and IPv6 portal authentication can both be enabled on an interface or on a service template.
You can specify both a primary portal Web server and a backup portal Web server after enabling
each type (IPv4 or IPv6) of portal authentication.
The device first uses the primary portal Web server for portal authentication. When the primary portal
Web server is unreachable but the backup portal Web server is reachable, the device uses the
backup portal Web server. When the primary portal Web server becomes reachable, the device
switches back to the primary portal Web server for portal authentication.
To automatically switch between the primary portal Web server and the backup portal Web server,
configure portal Web server detection on both servers.
Examples
# Specify portal Web server wbs as the backup portal Web server on GigabitEthernet 1/0/1 for portal
authentication. (Wired application).
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] portal apply web-server wbs secondary
# Specify portal Web server wbs as the backup portal Web server on service template service1 for
portal authentication. (Wireless application.)
<Sysname> system-view
[Sysname] wlan service-template service1
[Sysname-wlan-st-service1] portal apply web-server wbs secondary
Related commands
display portal
portal fail-permit server
portal web-server
server-detect (portal Web server view)

portal auth-error-record enable

Use portal auth-error-record enable to enable portal authentication error recording.
Use undo portal auth-error-record enable to disable portal authentication error recording.
Syntax
portal auth-error-record enable
undo portal auth-error-record enable
Default
Portal authentication error recording is disabled.
321

Advertisement

Table of Contents
loading

Table of Contents