Database Administration Manual - IP7 Secure
Gateway
as1
IP Appl Sock table is (8 of 4000) 1% full
Assoc Buffer Space Used (650 KB of 800 KB) on LOC = 1205
13. Back up the new changes, using the chg-db:action=backup:dest=fixed command. These
messages should appear; the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change other attributes of the M3UA or SUA association, perform one of these
procedures.
lhost and alhost -
Other attributes of the M3UA or SUA Association -
Association
If you do not wish to change other attributes of the M3UA or SUA association, this procedure is
finished.
910-6278-001 Revision A, January 2012
IETF M3UA and SUA Configuration Procedures
as4
Changing the Host Values of a M3UA or SUA Association
as6
Changing the Attributes of a M3UA or SUA
536
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers