Tekelec IP7 Secure Gateway Administration Manual page 852

Database Administration Manual - IP7 Secure
Gateway
11. Verify the changes using the rtrv-slk command, with the card location and link values specified
in Step 10. For this example, enter this command.
rtrv-slk:loc=2207:link=a
When the rtrv-slk command has completed, no entry is displayed showing that the signaling
link has been removed.
rlghncxa03w 09-09-18 13:43:31 GMT EAGLE5 41.1.0
E2373 Cmd Rej: Link is unequipped in the database
12. Back up the new changes using the chg-db:action=backup:dest=fixed command. These
messages should appear, the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
910-6278-001 Revision A, January 2012
IPSG M2PA and M3UA Configuration Procedures
852