Tekelec IP7 Secure Gateway Administration Manual page 552

Database Administration Manual - IP7 Secure
Gateway
From
Sheet1
rtrv-ip-host command with
From
Sheet 3
Perform the "Adding an IP
Link" procedure in this
Note: The IP address of the IP link should be assigned to the host name,
shown in the rtrv-ip-host output, that will be assigned to the association.
Sheet 2 of 6
910-6278-001 Revision A, January 2012
Enter the
this parameter.
:display=all
Is the
required host
Yes
name shown in the
rtrv-ip-host
output?
No
Enter the
rtrv-ip-lnk command
Is the required
Yes
IP link shown in the
rtrv-ip-lnk output?
(See Note)
No
Perform the "Adding an IP
Host" procedure in this
chapter and add the
required IP link
IETF M3UA and SUA Configuration Procedures
Enter the
rtrv-ip-lnk command
Enter the
rept-stat-card command with
this parameter:
:loc=<card location of the IP
address from the rtrv-ip-lnk
output assigned to the IP host>
To
Sheet 3
chapter and add the
required host name
To
Sheet 4
552