Tekelec IP7 Secure Gateway Administration Manual page 797

Database Administration Manual - IP7 Secure
Gateway
Zero entries found.
The following features have expired temporary keys:
Feature Name
Zero entries found.
If the ITU National and International Spare Point Code Support feature is not enabled, perform
the "Activating the ITU National and International Spare Point Code Support feature" procedure
in the Database Administration Manual - SS7 and enable and turn on the ITU National and
International Spare Point Code Support feature.
5. Add the network appearance to the database with the ent-na command.
If the gc parameter is specified with the ent-na command, the gc parameter value must be shown
in the rtrv-sid output in
rtrv-spc output in
ent-na:na=1000:type=itui
ent-na:na=3:type=itun24
ent-na:na=150000:type=itun:gc=uk
ent-na:na=2000:type=ituis
ent-na:na=5000:type=ituns:gc=sp
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
ENT-NA: MASP A - COMPLTD
6. Verify the changes using the rtrv-na command. This is an example of the possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
TYPE GC
ANSI --
ITUI --
ITUN uk
ITUN fr
ITUN ge
ITUN24 --
ITUIS --
ITUNS sp
7. Back up the new changes, using the chg-db:action=backup:dest=fixed command.
These messages should appear; the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
910-6278-001 Revision A, January 2012
Partnum
Step 2, or assigned to an ITU-N point code (SPC-N) shown in the
Step 3. For this example, enter these commands.
NA
100
1000
150000
4000000000
1000000000
3
2000
5000
IPSG M2PA and M3UA Configuration Procedures
797