Figure 75: Changing The Routing Context Value In An Existing Routing Key - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
Enter the chg-appl-rtkey command
with these parameters:
:rcontext=<current routing context
value assigned to the routing key>
:nrcontext=<new routing context
value, 0 - 4294967295>
The new routing context value cannot
be assigned to another routing key
Enter the rtrv-appl-rtkey command
with these parameters:
:display=all
:rcontext=<new routing context value
specified in the previous step>
Was the open
parameter value of the
associations assigned to this
routing key changed
in this procedure?
Enter the
chg-assoc command with these
parameters
:aname=<association name>
open=yes
Repeat this step for each association that
was changed in this procedure.
Sheet 2 of 2

Figure 75: Changing the Routing Context Value in an Existing Routing Key

910-6278-001 Revision A, January 2012
No
Yes
IETF M3UA and SUA Configuration Procedures
Enter the
chg-db:action=backup:dest-fixed
command
587