Tekelec IP7 Secure Gateway Administration Manual page 306

Ip7 secure gateway
Table of Contents

Advertisement

Database Administration Manual - IP7 Secure
Gateway
IPGWAPC MATELSN
yes
LOC
1103 A
Link set table is ( 14 of 1024)
To assign a mate IPGWx linkset to this linkset, this linkset cannot contain more than one signaling
link.
If this linkset does not contain more than one signaling link, and the linkset that will be the mate
IPGWx linkset is shown in the rept-stat-iptps output in
Step
3.
If this linkset does not contain more than one signaling link, and the linkset that will be the mate
IPGWx linkset is not shown in the rept-stat-iptps output in
with
Step
5.
If this linkset contains more than one signaling link, and you wish to add the mate IPGWx linkset
to this linkset, perform the
the signaling links in the linkset. After the signaling links have been removed, perform one of these
actions.
If the linkset that will be the mate IPGWx linkset is shown in the rept-stat-iptps output
in
Step
1, continue the procedure with
If the linkset that will be the mate IPGWx linkset is not shown in the rept-stat-iptps output
Step
1, perform the
in
mate IPGWx linkset. After the linkset has been added, continue the procedure with
If this linkset contains more than one signaling link, and you do not wish to add the mate IPGWx
linkset to this linkset, perform one of these actions.
If wish to use another linkset shown in the rept-stat-iptps output in
step with a linkset shown in the rept-stat-iptps output in
Perform the
mate IPGWx linkset will be assigned to. After the linkset has been added, if the linkset that will
be the mate IPGWx linkset is shown in the rept-stat-iptps output in
procedure with
rept-stat-iptps output in
add the new IPGWx linkset that will be the mate IPGWx linkset. After the mate IPGWx linkset
has been added, continue the procedure with
3. Display the mate linkset from the IPGWx linksets shown in the rept-stat-iptps output in
1.
For this example, enter this command.
rtrv-ls:lsn=lsgw1107
This is an example of the possible output.
rlghncxa03w 08-04-17 11:43:04 GMT EAGLE5 38.0.0
LSN
lsgw1107
910-6278-001 Revision A, January 2012
IPTPS LSUSEALM SLKUSEALM GTTMODE
---------- 10000 70
LINK SLC TYPE
0
SS7IPGW
Removing an IPGWx Signaling Link
Configuring an IPGWx Linkset
Configuring an IPGWx Linkset
Step
3. If the linkset that will be the mate IPGWx linkset is not shown in the
Step
APCA
(SS7)
SCRN
003-002-004
none
IETF M3UA and SUA Configuration Procedures
% 70
1% full
Step
3.
procedure to add the linkset that will be the
procedure to add the new IPGWx linkset that the
1, perform the
Configuring an IPGWx Linkset
Step 14
L3T SLT
SET SET BEI LST LNKS ACT MES DIS SLSCI NIS
1
1
no
A
1
% CdPA
Step
1, continue the procedure with
Step
1, continue the procedure
procedure to remove all but one of
Step
1, repeat this
Step
1.
Step
1, continue the
procedure to
GWS GWS GWS
off off off no
Step
5.
Step
off
306

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Eagle

Table of Contents