Tekelec IP7 Secure Gateway Administration Manual page 563

Database Administration Manual - IP7 Secure
Gateway
SCTP command complete
8. Perform the Changing the Attributes of a M3UA or SUA Association
retransmission parameters of the association based on the results of the outputs of
7.
The Weighted Average round-trip time shown in the assocrtt pass command output
in Step 5, and the data retransmission counts shown in the sctp -a pass command output in
6 are used as a guide to determine the appropriate values for the rmode, rmin, rmax, and rtimes
parameters. If the retransmission parameters do not have to be adjusted, do not perform this step.
This procedure is finished.
910-6278-001 Revision A, January 2012
none left tosend = 0
none left rwnd gate = 5
none left cwnd gate = 8
IETF M3UA and SUA Configuration Procedures
procedure to change the
Step 6 and Step
Step
563