Database Administration Manual - IP7 Secure
Gateway
If linksets are displayed in the rept-stat-iptps output in
with
Step
10.
If linksets are not displayed in the rept-stat-iptps output in
contains signaling links has to be removed. To perform this action, continue the procedure with
Step
9.
If you do not wish to perform other actions to increase the available TPS and the available TPS will
allow the IPSG M2PA signaling link to be added, continue the procedure with
9. Display the signaling links that are assigned to IPLIMx cards by entering this command.
rtrv-slk:type=iplim
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0
LOC
LINK LSN
1301 A
lsniplim
1301 A1
lsniplim
1301 B1
lsniplim
1317 A
lsniplimi
SLK table is (30 of 1200) 2% full.
If IPLIMx cards containing signaling links are shown in the rtrv-slk output, perform the
an IPLIMx Card
If IPLIMx cards containing signaling links are not displayed in the rtrv-slk output, perform one
or more of these actions to increase the available TPS.
Note: If one or more of these actions are not performed to increase the available TPS and the
available TPS will not allow the IPSG M2PA signaling link to be added, the IPSG M2PA signaling
link cannot be added and the remainder of this procedure cannot be performed.
Some ATM high-speed signaling links have to be removed. To perform this action, continue
the procedure with
The IP TPS values of some IPGWx linksets have to be changed or the MAXSLKTPS values of
some IPSG linksets (and the RSVDSLKTPS values if necessary) have to be changed.
If linksets are displayed in the rept-stat-iptps output in
with
Step
10.
If linksets are not displayed in the rept-stat-iptps output in
signaling links have to be removed. To perform this action, continue the procedure with
8.
If you do not wish to perform other actions to increase the available TPS and the available TPS will
allow the IPSG M2PA signaling link to be added, continue the procedure with
10. Display the attributes of the linksets shown in
name of the linkset shown in
For this example enter these commands.
rtrv-ls:lsn=ipgwx1
910-6278-001 Revision A, January 2012
SLC TYPE
0
IPLIM
1
IPLIM
2
IPLIM
0
IPLIMI
procedure to remove an IPLIMx card and its associated signaling links.
Step
8.
Step
5.
IPSG M2PA and M3UA Configuration Procedures
ANAME
SLKTPS
M2PA
M2PA
M2PA
M2PA
Step 5
by entering the rtrv-ls command with the
Step
5, continue the procedure
Step
5, an IPLIMx card that
Step
11.
Step
5, continue the procedure
Step
5, some ATM high-speed
Step
11.
Removing
Step
759
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers