Tekelec IP7 Secure Gateway Administration Manual page 538

Database Administration Manual - IP7 Secure
Gateway
The new buffer size for this association
cannot exceed the available buffer size
If you wish to increase the buffer size
for this association to a value that is
greater than the available buffer size
for the card, the buffer size of the other
associations assigned to the card must
Enter the rtrv-assoc command
with this parameter:
:aname=<name assigned to the
association displayed in the
Repeat this step for each
association displayed in the
Are the new bufsize
values for these associations
greater than or equal to the cwmin
values for these associations?
Note: The bufsize value must be greater than or equal to
the cwmin value.
The cwmin value is the number of bytes specified for the
size of the association's congestion window. The bufsize
value is the number of kilobytes specified for the size of
the association's buffer .
To determine whether or not the bufsize value is greater
than or equal to the cwmin value, perform one of these
actions:
Multiply the bufsize value by 1024
Divide the cwmin value by 1024.
Sheet 2 of 4
910-6278-001 Revision A, January 2012
From
Sheet 1
for the card.
be decreased.
previous step>
previous step.
No
(See the Note)
Yes
Enter the chg-assoc command with these
association displayed in the previous step>
Repeat this step as necessary for each
association displayed in the previous step.
IETF M3UA and SUA Configuration Procedures
Do the buffers
No
on the other associations
assigned to the card need
to be changed?
Yes
Enter the rtrv-assoc command
with this parameter:
:lhost=<local host name
assigned to the association
being changed>
Either choose another value for
the bufsize parameter that is
greater than or equal to the
cwmin value, or change the
cwmin value by performing the
Changing the Attributes of an
M3UA or SUA Association"
procedure.
parameters:
:aname=<name assigned to the
:bufsize=<8 400>
To
Sheet 3
538