Tekelec IP7 Secure Gateway Administration Manual page 748

Database Administration Manual - IP7 Secure
Gateway
alhost parameter value represents the IP address corresponding to the other network interface
of the same IP card.
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
ENT-ASSOC: MASP A - COMPLTD
8. Verify the changes using the rtrv-assoc command specifying the association name specified in
Step 7. For this example, enter these commands.
rtrv-assoc:aname=assoc1
This is an example of possible output.
rlghncxa03w 09-05-28 09:12:36 GMT EAGLE5 41.0.0
ANAME assoc1
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
IP Appl Sock table is (5 of 4000) 1% full
Assoc Buffer Space Used (16 KB of 800 KB) on LOC = 1305
9. Back up the new changes, using the chg-db:action=backup:dest=fixed command. These
messages should appear; the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
910-6278-001 Revision A, January 2012
1305 IPLNK PORT
M3UA VER
gw105.nc.tekelec.com
---
gw100.nc.tekelec.com
---
1030 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
YES ALW
IPSG M2PA and M3UA Configuration Procedures
A LINK
M3UA RFC
1030
2 BUFSIZE
120 RMAX
3000 UAPS
YES RTXTHR
A
16
800
10
0
748