Tekelec IP7 Secure Gateway Administration Manual page 793

Database Administration Manual - IP7 Secure
Gateway
From
Sheets 3,
4, or 5
Note: Dashes for the LINK
value of an association indicate
that the association is not
assigned to a signaling link.
Enter the rtrv-slk command with
this parameter.
:aname=<the name of the
association that will be assigned
to the signaling link>
How many signaling
links is the association
assigned to?
An association can be assigned
to a maximum of 16 signaling
links. Choose another IPSG card
for this signaling link.
To
Sheet 2
Sheet 6 of 7
910-6278-001 Revision A, January 2012
Enter the rtrv-assoc command
with this parameter.
:loc=<the location of the IPSG
card that the signaling link will
be assigned to>
A Value other
What is LINK
than Dashes
value of the
association? See the
Note.
15 or
Less
16
that will be assigned to the signaling
link, that is unique when compared to
the other linksets that this association
IPSG M2PA and M3UA Configuration Procedures
Are any entries
shown in the rtrv-assoc
output? See
the Note.
Yes
Dashes
Enter the rtrv-ls command with this
parameter.
:lsn=<the name of the linkset
shown in the rtrv-slk output>
Repeat this step for each linkset
name shown in the rtrv-slk output.
Enter the rtrv-ls command with this
parameter.
:lsn=<the name of the linkset that
will be assigned to the new
signaling link output>
Does the linkset that
will be assigned to the new
signaling link contain a unique
RCONTEXT value?
No
Perform the Changing an IPSG
M3UA Linkset" procedure to add a
routing context value to the linkset
is assigned to.
No
Perform the Adding an IPSG
M3UA Association" procedure to
add the IPSG M3UA association.
This association must be
assigned to the IPSG card that
the IPSG M3UA signaling link will
be assigned to.
Yes
To
Sheet 7
793