Tekelec IP7 Secure Gateway Administration Manual page 716

Database Administration Manual - IP7 Secure
Gateway
The output displays the link status as OOS-MT-DSBLD and gives off a minor alarm:
rlghncxa03w 06-10-27 17:00:36 GMT EAGLE5 36.0.0
SLK LSN
1201,A nc001
ALARM STATUS = * 0236 REPT-LKS:not aligned
UNAVAIL REASON = NA
Command Completed.
6. Verify the status of the IP card to be inhibited using the rept-stat-card command.
For example, enter this command.
rept-stat-card:loc=1201
This is an example of the possible output.
rlghncxa03w 10-12-01 09:12:36 GMT EAGLE5 43.0.0
CARD VERSION
1201 133-003-000
ALARM STATUS
BLIXP GPL version = 133-003-000
IMT BUS A
IMT BUS B
CURRENT TEMPERATURE
PEAK TEMPERATURE:
SIGNALING LINK STATUS
SLK
A
Command Completed.
If the IP card to be inhibited is in service-normal (IS-NR), continue the procedure with
inhibit the card. If the IP card is out-of-service-maintenance disabled (OOS-MT-DSBLD), continue
the procedure with
7. Inhibit the IP card using the inh-card command.
For example, enter this command.
inh-card:loc=1201
This message should appear.
rlghncxa03w 06-10-28 21:18:37 GMT EAGLE5 36.0.0
Card has been inhibited.
8. Display the status of the IP card to verify that it is out-of-service maintenance-disabled
(OOS-MT-DSBLD).
Enter this command.
rept-stat-card:loc=1201
This is an example of the possible output.
rlghncxa03w 10-12-01 09:12:36 GMT EAGLE5 43.0.0
CARD VERSION
1201 133-003-000
ALARM STATUS
BLIXP GPL version = 133-003-000
IMT BUS A
IMT BUS B
910-6278-001 Revision A, January 2012
CLLI
----------- OOS-MT-DSBLD AVAIL
TYPE GPL
E5ENET IPSG
= No Alarms.
= Conn
= Conn
= 32C ( 90F)
= 39C (103F)
PST
IS-NR
Step 9.
TYPE GPL
E5ENET IPSG
= No Alarms.
= Conn
= Conn
IPSG M2PA and M3UA Configuration Procedures
PST SST
PST
IS-NR
[ALARM TEMP:
[06-05-02 13:40]
LS CLLI
nc001 -----------
PST
OOS-MT-DSBLD
AST
---
SST AST
Active -----
60C (140F)]
Step 7
SST AST
Manual -----
to
716