Tekelec IP7 Secure Gateway Administration Manual page 967

Database Administration Manual - IP7 Secure
Gateway
From
Sheets 3
or 4
Enter the
chg-assoc command with
these parameters.
:aname=<association
name being changed>
:open=yes
Sheet 5 of 6
910-6278-001 Revision A, January 2012
Enter the chg-assoc command with this mandatory
parameter:
:aname=<name of the association being changed>
and with at least one of these optional parameters.
:lhost = <local host name from the
rtrv-ip-host output>
:lport = <TCP port for the local host>
:alhost <alternate local host name from the
rtrv-ip-host output, or the value none>
:adapter = <m2pa, m3ua>
:m2patset = <1 20>
:ver = <d6 or rfc>
:uaps = <1 - 10>
(See Notes 1 through 11 on Sheet 6)
Was the association
Yes
assigned to a signaling link
when this procedure was
started?
No
Was the value
Yes
of the open parameter
changed on
Sheet 1?
No
Enter the
rtrv-assoc command with this
parameter.
:aname=<association name
specified with the
chg-assoc command>
IPSG M2PA and M3UA Configuration Procedures
What is the
M3UA
ADAPTER value of the
association?
M2PA
Perform the "Adding
an IPSG M2PA
Signaling Link"
procedure in this
chapter to add a
signaling link to the
association.
Enter the
chg-db:action=backup:dest=fixed
command.
To
Sheet 6
Perform the "Adding
an IPSG M3UA
Signaling Link"
procedure in this
chapter to add a
signaling link to the
association.
967