Tekelec IP7 Secure Gateway Administration Manual page 1042

Database Administration Manual - IP7 Secure
Gateway
Sheet 4 of 6
910-6278-001 Revision A, January 2012
From
Sheets 2
or 3
Which signaling
link quantity is being
enabled?
1500
Enter the
enable-ctrl-feat command with
these parameters:
:partnum=893005901
:fak=<feature access key>
Note: If you do not have the feature
access key, contact your Tekelec
sales representative or account
representative.
Enter the rtrv-ctrl-feat command
with this parameter:
:partnum=<part number specified
with the enable-ctrl-feat
command>
Enter the
chg-db:action=backup:dest=fixed
command
Note: Before the 2800 signaling link quantity is enabled,
make sure the EAGLE 5 ISS is configured with the required
hardware shown in the Hardware Supported for Signaling
Link Quantities Greater than 2000" section in this
procedure.
If hardware other than the hardware shown in the
Hardware Supported for Signaling Link Quantities Greater
than 2000" section is installed and provisioned, contact the
Customer Care Center before enabling the 2800 signaling
link quantity. Refer to the Customer Care Center" section
in Chapter 1 for the contact information.
2000 or 2800
(See the
Note)
To
Sheet 5
Reference Information
1042