Tekelec IP7 Secure Gateway Administration Manual page 930

Database Administration Manual - IP7 Secure
Gateway
3. If the value of the open parameter is yes, only the values of the alw and rtxthr parameters
can be changed. To change the values of the other parameters, the value of the open parameter
value must be no.
4. The value of the rmin parameter must be less than or equal to the rmax parameter value.
5. The M2PA version of the association determines the version of the M2PA timer set that is
assigned to the association. For example, if M2PA timer set 3 is assigned to the M2PA association,
and the association is an RFC M2PA association, the RFC version of M2PA timer set 3 is used
with the association. If M2PA timer set 7 is assigned to the M2PA association, and the association
is a Draft 6 M2PA association, the Draft 6 version of M2PA timer set 7 is used with the association.
6. The m2patset and ver parameters can be specified only for IPSG M2PA associations.
7. If the adapter parameter value for the association is M3UA, the alw parameter cannot be
specified.
When these commands have successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
CHG-ASSOC: MASP A - COMPLTD;
If the value of the open parameter was not changed in
11. Change the value of the open parameter to yes by specifying the chg-assoc command with the
open=yes parameter.
For this example, enter these commands.
chg-assoc:aname=assoc2:open=yes
chg-assoc:aname=assoc1:open=yes
When this command has successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
CHG-ASSOC: MASP A - COMPLTD;
12. Verify the changes using the rtrv-assoc command specifying the association name specified in
Step 10 and Step
For this example, enter these commands.
rtrv-assoc:aname=assoc2
This is an example of possible output.
rlghncxa03w 10-07-28 21:14:37 GMT EAGLE5 42.0.0
ANAME assoc2
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL MATCH
LSN
e5e6a
910-6278-001 Revision A, January 2012
11.
1205 IPLNK PORT
M2PA VER
IPNODE2-1205
---
gw200.nc-tekelec.com
gw210.nc-tekelec.com
2048 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
YES ALW
M2PATSET
IPSG M2PA and M3UA Configuration Procedures
Step 3, continue the procedure with
A LINK
M2PA RFC
2048
2 BUFSIZE
120 RMAX
3000 UAPS
NO RTXTHR
1
Step 12.
A
400
800
10
10000
930