Tekelec IP7 Secure Gateway Administration Manual page 838

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command
The ADAPTER value assigned to
the association must be either
M2PA or M3UA.
Are signaling
links assigned to the
card?
What is the
ADAPTER value of the
association?
Perform the "Removing an
IPSG M3UA Signaling Link"
procedure in this chapter to
remove all the signaling links
that are assigned to the
card.
Sheet 1 of 2
910-6278-001 Revision A, January 2012
Enter the rtrv-card command
:loc = <the location of the card
containing the association that will be
removed, shown in the rtrv-assoc
IPSG
assigned to the card?
No
To
Sheet 2
Yes
Perform the "Removing an
IPSG M2PA Signaling Link "
M2PA
procedure in this chapter to
remove all the signaling links
that are assigned to the
M3UA
IPSG M2PA and M3UA Configuration Procedures
with this parameter:
output>
IPLIM,
IPLIMI
What application is
Perform the "Removing an
SS7IPGW,
M3UA or SUA Association"
IPGWI
procedure in Chapter 4 to
card.
To
Sheet 2
Perform the "Removing an
M2PA Association "
procedure in Chapter 3 to
remove the M2PA
association.
remove the M3UA
association.
838