Tekelec IP7 Secure Gateway Administration Manual page 789

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
Was a new
Yes
IPSG card added on
Sheet 1?
No
Will adding the
new signaling link
exceed the 5000 TPS limit
for the IPSG card? See
the Note.
No
To
Sheet 3
Note: When the IPSG M3UA signaling
link is added, the RSVDSLKTPS value
that is assigned to the linkset will be
assigned to the signaling link. The
sum of the TPS used by all the
signaling links that are assigned to the
IPSG card cannot exceed 5000 TPS.
The TPS used by the IPSG card and
the TPS used by each signaling link
that is assigned to the IPSG card is
shown when the rtrv-slk command
with the location of the IPSG card was
performed on Sheet 1.
Sheet 2 of 7
910-6278-001 Revision A, January 2012
Enter the rept-stat-iptps
command
Perform the "Adding an
IPSG M3UA Linkset"
procedure to add a new
IPSG M3UA linkset to the
database. See the Note.
What is the
M3UA
ADAPTER value for
the linkset?
M2PA
A new signaling link
cannot be added to this
Yes
card unless the
RSVDSKLTPS value
for at least one of the
linksets shown in the
rtrv-slk output are
changed.
Do you
wish to change the
RSVDSLKTPS value in any of
the linksets shown in
the rtrv-slk output?
A new signaling link
cannot be added to
this card. Choose
another IPSG card.
IPSG M2PA and M3UA Configuration Procedures
Is the desired
Yes
linkset shown in the
rept-stat-iptps
output?
Enter the rtrv-ls command
No
with this parameter.
:lsn=<the name of the
linkset shown in the
rept-stat-iptps output>
What is the
Yes
IPSG value for the
linkset?
No
Perform the "Changing an IPSG
M3UA Linkset" or the "Changing
an IPSG M2PA Linkset "
Yes
procedure, as necessary, to
change the appropriate
RSVDSLKTPS values in the
linksets shown in the rtrv-slk
No
To
Sheet 1
Choose another
linkset from the
rept-stat-iptps
output.
output.
To
Sheet 3
789