Tekelec IP7 Secure Gateway Administration Manual page 528

Database Administration Manual - IP7 Secure
Gateway
Enter the chg-assoc
:aname=<association name being
changed> command with these optional
:lport = <TCP port for the local host>
:rhost = <remote host name>
:rhosttype=<primary or alternate>
rhostval=<relaxed, match>
:rport = <TCP port for the remote host>
:alw = <yes, no>
:rmode = rfc or lin
:rmin = <10
:rmax = <10
:rtimes = <3
:cwmin = <1500
:adapter = <m3ua, sua>
:istrms = <1 or 2>
:ostrms = <1 or 2>
:uaps = <1
rtxthr = <0
(See the Notes)
Was the value
of the open parameter
changed on Sheet 4?
Sheet 7 of 8
910-6278-001 Revision A, January 2012
From
Sheet 6
Notes:
1. If any optional parameters are not
specified with the chg-assoc
parameters:
command, those values are not
changed.
2. The value of the rmin parameter
must be less than or equal to the rmax
parameter value.
3. The value of the rhost parameter is
a text string of up to 60 characters,
1000>
with the first character being a letter.
1000>
The command input is limited to 150
12>
characters, including the hostname.
409600>
4. If the value of the open parameter is
yes, only the values of the alw and
rtxthr parameters can be changed. To
change the values of the other
10>
parameters, the value of the open
65535>
parameter must be no.
Yes :aname=<association
changed>:open=yes
No
:aname=<association
name specified with the
chg-assoc command>
IETF M3UA and SUA Configuration Procedures
Enter the
chg-assoc
name being
command
Enter the
rtrv-assoc
command
To
Sheet 8
528