Tekelec IP7 Secure Gateway Administration Manual page 553

Database Administration Manual - IP7 Secure
Gateway
rtrv-assoc command with this
:lhost<local host value from
the rtrv-ip-host output>
rtrv-as command with this parameter:
:aname<association name from the
Repeat this step for each association
displayed in the rtrv-assoc output.
association - application
server assignments reference the
local host value shown in the
Sheet 3 of 6
910-6278-001 Revision A, January 2012
From
Sheet 2
Enter the
parameter:
Enter the
rtrv-assoc output>
How many
50
rtrv-ip-host output on
Sheet 2? (See Note)
Less than
50
Was the
No
rept-stat-card
command performed
on Sheet 2?
Yes
IETF M3UA and SUA Configuration Procedures
Note: An association can be assigned to
more than one application server.
Each association and application server
combination is referred to as an
association - application server
assignment.
This local host value cannot be used
for this association.
Go to Sheet 2 and add a new IP link
and IP host for this association
To
Sheet 2
Enter the
rept-stat-card:loc=<card
location from the rtrv-ip-lnk
output> command
To
Sheet 4
553