Tekelec IP7 Secure Gateway Administration Manual page 550

Database Administration Manual - IP7 Secure
Gateway
15. Back up the new changes, using the chg-db:action=backup:dest=fixed command. These
messages should appear; the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change other attributes the of the M3UA or SUA association, perform one of these
procedures.
bufsize -
Other attributes of the M3UA or SUA association -
Association
If you do not wish to change the other attributes of the M3UA or SUA association, this procedure
is finished.
910-6278-001 Revision A, January 2012
Changing the Buffer Size of a M3UA or SUA Association
IETF M3UA and SUA Configuration Procedures
Changing the Attributes of a M3UA or SUA
550