Tekelec IP7 Secure Gateway Administration Manual page 963

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command.
Enter the rtrv-assoc command
with this parameter.
:aname=<name of the
association being changed>
No
association contain an
To
Sheet 2
ALHOST value from this
No
association the only action to
be performed in this
Enter the chg-assoc command with these
:aname=<name of the association being
the open parameter
chg-assoc command with
:aname=<association
name being changed>
Sheet 1 of 6
910-6278-001 Revision A, January 2012
Enter the rtrv-card command
with this parameter.
:loc = <the location of the card
containing the association that will be
changed, shown in the rtrv-assoc
output>
Does the IPSG
ALHOST value?
Yes
Is removing the
procedure?
Yes
parameters.
changed>
:alhost=none
Was the value of
No
changed?
Yes
Enter the
Enter the rtrv-assoc command
these parameters.
:aname=<association name
chg-assoc command>
:open=yes
IPSG M2PA and M3UA Configuration Procedures
What is the
No
value of the open
parameter?
Yes
Enter the chg-assoc command with
these parameters.
:aname=<name of the association
being changed>
:open=no
M2PA
Perform the "Changing
the Host Values of an
M2PA Association "
procedure to change
the host values of the
association.
with this parameter.
chg-db:action=backup:dest=fixed
specified with the
Is the IPSG
No
application is assigned
to the card?
Yes
What is the
ADAPTER value of the
association?
M3UA
Perform the "Changing
the Host Values of an
M3UA or SUA
Association" procedure
change the host values
of the association.
To
Sheet 6
Enter the
command.
963