Tekelec IP7 Secure Gateway Administration Manual page 708

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 7
Was the state
of the signaling link
changed on
Sheet 2?
Enter the
act-slk:loc=<card location of
the signaling link>
:link=<signaling link assigned
to the card> command
Enter the
rept-stat-slk:loc=<card
location of signaling link>
:link=<signaling link assigned
to the card> command
chg-db:action=backup:dest=fixed
Perform the "Configuring an IP
Card" procedure in this chapter to
change the IP address of the
default router to an IP address
whose network portion matches the
network portion of the new IP
address of the IP link
Sheet 8 of 9
910-6278-001 Revision A, January 2012
No
Yes
Were the ipaddr or
submask paramter
values changed?
Enter the
command
Was the default
Yes
router IP address
changed on
Sheet 4?
Sheet 9
IPSG M2PA and M3UA Configuration Procedures
Yes
No
No
To
708