Tekelec IP7 Secure Gateway Administration Manual page 952

Database Administration Manual - IP7 Secure
Gateway
2. Enter the rtrv-card command with the location of the card that is hosting the IPSG association
that will be changed in this procedure. For this example, enter this command.
rtrv-card:loc=2105
This is an example of possible output.
rlghncxa03w 08-04-06 15:17:20 EST EAGLE5 38.0.0
CARD TYPE
2105 ENET
If the application assigned to the card is IPSG, shown in the APPL column, continue the procedure
by performing one of these steps.
If the open parameter value for the association being changed is yes, continue the procedure
with Step 3.
If the open parameter value for the association being changed is no, continue the procedure
with Step 4.
If the application assigned to the card is IPLIM or IPLIMI, perform the
a M2PA Association
If the application assigned to the card is SS7IPGW or IPGWI, perform the
of a M3UA or SUA Association
3. Change the value of the open parameter to no by specifying the chg-assoc command with the
open=no parameter.
For this example, enter this command.
chg-assoc:aname=assoc2:open=no
When this command has successfully completed, this message should appear.
rlghncxa03w 08-04-28 09:12:36 GMT EAGLE5 38.0.0
CHG-ASSOC: MASP A - COMPLTD;
4. Display the association being changed by entering the rtrv-assoc command with the aname
parameter specified in
For this example, enter this command.
rtrv-assoc:aname=assoc2
This is an example of the possible output.
rlghncxa03w 10-07-28 21:14:37 GMT EAGLE5 42.0.0
ANAME assoc2
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
910-6278-001 Revision A, January 2012
APPL LSET NAME
IPSG e5e6a
e5e6a
procedure.
procedure.
Step 3.
2105 IPLNK PORT
M2PA VER
IPNODE2-1205
M2PA1
gw200.nc-tekelec.com
---
2048 RPORT
2 OSTRMS
LIN RMIN
10 CWMIN
NO ALW
M2PATSET
IPSG M2PA and M3UA Configuration Procedures
LINK SLC LSET NAME
A 0 e5e6a
A3 2
A,B LINK
M2PA RFC
2048
2 BUFSIZE
120 RMAX
3000 UAPS
YES RTXTHR
1
LINK SLC
B2 1
Changing the Host Values of
Changing the Host Values
A
400
800
10
2000
952