Tekelec IP7 Secure Gateway Administration Manual page 585

Database Administration Manual - IP7 Secure
Gateway
assoc1
STATIC Route Key table is (17 of 2000) 1% full
STATIC Route Key Socket Association table is (17 of 32000) 1% full
Note: If Step 4
7. Change the value of the open parameter of the associations that were changed in
specifying the chg-assoc command with the open=yes parameter. For this example, enter this
command.
chg-assoc:aname=assoc1:open=yes
When this command has successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
CHG-ASSOC: MASP A - COMPLTD;
Repeat this step for all the associations that were changed in
8. Back up the new changes using the chg-db:action=backup:dest=fixed command. These
messages should appear, the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
910-6278-001 Revision A, January 2012
was not performed in this procedure, continue the procedure with
IETF M3UA and SUA Configuration Procedures
Step 4.
Step 8.
Step 4 to yes by
585