Database Administration Manual - IP7 Secure
Gateway
When this command has successfully completed, the following message should appear.
rlghncxa03w 06-10-28 21:15:37 GMT EAGLE5 36.0.0
ENT-SERIAL-NUM:
6. Enable the Large MSU Support for IP Signaling feature with the enable-ctrl-feat command
specifying the part number for the Large MSU Support for IP Signaling feature and the feature
access key. Enter this command.
enable-ctrl-feat:partnum=893018401:fak=<Large MSU Support for IP Signaling
feature access key>
Note: A temporary feature access key cannot be specified to enable this feature.
Note: The values for the feature access key (the fak parameter) are provided by Tekelec. If you
do not have the feature access key for the feature you wish to enable, contact your Tekelec Sales
Representative or Account Representative.
When the enable-crtl-feat command has successfully completed, this message should appear.
rlghncxa03w 06-10-28 21:15:37 GMT EAGLE5 36.0.0
ENABLE-CTRL-FEAT: MASP B - COMPLTD
7. Turn the Large MSU Support for IP Signaling feature on with the chg-ctrl-feat command
specifying the part number for the Large MSU Support for IP Signaling feature and the status=on
parameter. Enter this command.
chg-ctrl-feat:partnum=893018401:status=on
When the chg-crtl-feat command has successfully completed, this message should appear.
rlghncxa03w 07-05-28 21:15:37 GMT EAGLE5 37.0.0
CHG-CTRL-FEAT: MASP B - COMPLTD
8. Verify the changes by entering the rtrv-ctrl-featcommand with the Large MSU Support for
IP Signaling feature part number. Enter this command.
rtrv-ctrl-feat:partnum=893018401
The following is an example of the possible output.
rlghncxa03w 10-04-28 21:15:37 GMT EAGLE5 42.0.0
The following features have been permanently enabled:
Feature Name
Large MSU for IP Sig
The following features have been temporarily enabled:
Feature Name
Zero entries found.
The following features have expired temporary keys:
Feature Name
Zero entries found.
910-6278-001 Revision A, January 2012
MASP A - COMPLTD
Partnum
893018401
Partnum
Partnum
IPSG M2PA and M3UA Configuration Procedures
Status
Quantity
on
----
Status
Quantity
Trial Period Left
804
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers