Tekelec IP7 Secure Gateway Administration Manual page 995

Database Administration Manual - IP7 Secure
Gateway
1. Display the current IP options in the database by entering the rtrv-sg-opts command. The
following is an example of the possible output.
rlghncxa03w 06-10-28 21:16:37 GMT EAGLE5 36.0.0
SCTPCSUM:
The rtrv-sg-opts command output contains other fields that are not used by this procedure. If
you wish to see all the fields displayed by the rtrv-sg-opts command, see the rtrv-sg-opts
command description in the Commands Manual.
2. Display the cards in the EAGLE 5 ISS by entering the rtrv-card command. This is an example
of the possible output.
rlghncxa03w 09-10-15 16:34:56 GMT EAGLE5 41.0.0
CARD TYPE
1101 DSM
1102 TSM
1104 DCM
1113 GSPM
1114 TDM-A
1115 GSPM
1116 TDM-B
1117 MDAL
1201 LIMDS0
1202 DCM
1203 LIMDS0
1204 LIMATM
1205 DCM
1207 DCM
1303 DCM
1305 DCM
1308 DCM
1315 ENET
1317 DCM
Record the card location, shown in the LOC column, and signaling link, shown in the LINK column,
information for all cards running the IPSG application.
3. Select one of the IPSG cards shown in
entering the rtrv-assoc command and specifying the card location of the IPSG card. For this
example, enter this command.
rtrv-assoc:loc=1315
The following is an example of the possible output.
rlghncxa03w 08-04-28 09:12:36 GMT EAGLE5 38.0.0
ANAME
assoc3
IP Appl Sock/Assoc table is (9 of 4000) 1% full
Assoc Buffer Space Used (19 KB of 800 KB) on LOC = 1315
If the ADAPTER value of the associations shown in the rtrv-assoc output is M3UA, continue the
procedure with
If the ADAPTER value of the associations shown in the rtrv-assoc output is M2PA, do not perform
the remainder of this procedure. Perform the
M2PA Associations
910-6278-001 Revision A, January 2012
adler32
APPL LSET NAME
VSCCP
GLS
STPLAN
EOAM
EOAM
SS7ANSI lsn1
IPLIM ipnode2
SS7ANSI lsn2
ATMANSI atmgwy
IPLIM ipnode1
IPLIM ipnode2
IPLIM ipnode3
IPLIM ipnode4
IPLIM ipnode3
ipnode1
IPSG ipgtwy1
IPGWI ipgtwy2
Step
CARD IPLNK
LOC PORT LINK ADAPTER LPORT RPORT OPEN ALW
1315 A A
Step 4.
procedure to change the SCTP checksum algorithm for IPSG M2PA associations.
IPSG M2PA and M3UA Configuration Procedures
LINK SLC LSET NAME
A 0 lsn2
A 1
A 0 lsn1
A 0
A 0 ipnode3
A 0
A 0 ipnode1
A 0
B 2
A1 2 ipnode4
A
A
2. Display the associations assigned to the IPSG card by
M3UA 2345 1025
Changing the SCTP Checksum Algorithm Option for
LINK SLC
B 1
B 1
B 1
B 1
B2 1
YES YES
995