Database Administration Manual - IP7 Secure
Gateway
ANAME assoc1
LOC
ADAPTER
LHOST
ALHOST
RHOST
ARHOST
LPORT
ISTRMS
RMODE
RTIMES
OPEN
RHOSTVAL RELAXED
LSN
ipsgm3ua1
IP Appl Sock/Assoc table is (7 of 4000) 1% full
Assoc Buffer Space Used (600 KB of 6400 KB) on LOC = 1201
13. Back up the new changes, using the chg-db:action=backup:dest=fixed command.
These messages should appear; the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
If you wish to change the other attributes of the IPSG association, perform one of these procedures.
lhost and alhost -
Other attributes of the IPSG Association -
If you do not wish to change the other attributes of the IPSG association, this procedure is finished.
910-6278-001 Revision A, January 2012
1201
IPLNK PORT A
M3UA
VER
m3ua1
---
remote1
---
2000
RPORT
2
OSTRMS
LIN
RMIN
10
CWMIN
YES
ALW
Changing the Host Values of an IPSG Association
IPSG M2PA and M3UA Configuration Procedures
LINK
M3UA RFC
1030
2
BUFSIZE
120
RMAX
3000
UAPS
YES
RTXTHR
Changing the Attributes of an IPSG Association
A
400
800
10
0
945
Need help?
Do you have a question about the IP7 Secure Gateway and is the answer not in the manual?
Questions and answers