Tekelec IP7 Secure Gateway Administration Manual page 837

Database Administration Manual - IP7 Secure
Gateway
5. Verify the changes using the rtrv-assoc command with the name of the association specified
in Step 4.
For this example, enter these commands.
rtrv-assoc:aname=assoc1
rtrv-assoc:aname=swbel32
This is an example of possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
No matching entries found
IP Appl Sock table is (2 of 4000) 1% full
6. Back up the new changes, using the chg-db:action=backup:dest=fixed command. These
messages should appear; the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
910-6278-001 Revision A, January 2012
IPSG M2PA and M3UA Configuration Procedures
837