Tekelec IP7 Secure Gateway Administration Manual page 701

Database Administration Manual - IP7 Secure
Gateway
rtrv-ip-lnk command
ipaddr=0.0.0.0 parameter
to be specified with the
chg-ip-lnk command?
rtrv-ip-host command with
this parameter.
Is the current IP
address of the IP link
shown in the rtrv-ip-host
Perform the "Removing an IP
Host" procedure in this
chapter and remove the host
assigned to the IP address
Sheet 1 of 9
910-6278-001 Revision A, January 2012
Enter the
Is the
No
Yes
Enter the
:display=all
No
output?
Yes
rtrv-slk:loc=<card location of
the signaling link from the
rtrv-ip-lnk output> command
rept-stat-slk:loc=<card location
:link=<signaling link assigned
to the card> command
IPSG M2PA and M3UA Configuration Procedures
Enter the
Enter the
of the signaling link>
To
Sheet 2
701