Removing A Network Appearance - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway

Removing a Network Appearance

This procedure removes the network appearance from the database using the dlt-na command with
these parameters.
:na – the 32-bit value of the network appearance, from 0 to 4294967295.
:type – the network type of the network appearance, ansi (ANSI), itui (ITU-I), itun (14-bit ITU-N),
itun24 (24-bit ITU-N), ituis (ITU-I Spare), ituns (14-bit ITU-N Spare).
:gc – the specific ITU-N group code associated with the network appearance.
Specifying the gc parameter removes the specific network appearance containing the na and gc
parameter values.
Specifying the type=itun or type=ituns parameter without the gc parameter removes all 14-bit
ITU-N or 14-bit ITU-N spare network appearances containing the specified na parameter value.
1. Display the network appearances in the database with the rtrv-na command.
This is an example of the possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
TYPE GC
ANSI --
ITUI --
ITUN uk
ITUN fr
ITUN ge
ITUN24 --
ITUIS --
ITUNS sp
2. Remove the network appearance from the database with the dlt-na command.
For this example, enter these commands.
dlt-na:na=100:type=ansi
dlt-na:na=4000000000:type=itun:gc=fr
When each of these commands have successfully completed, this message should appear.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
DLT-NA: MASP A - COMPLTD
3. Verify the changes using the rtrv-na command.
This is an example of possible output.
rlghncxa03w 06-10-28 09:12:36 GMT EAGLE5 36.0.0
TYPE GC
ITUI --
ITUN uk
ITUN ge
ITUN24 --
ITUIS --
ITUNS sp
4. Back up the new changes, using the chg-db:action=backup:dest=fixed command.
910-6278-001 Revision A, January 2012
NA
100
1000
150000
4000000000
1000000000
3
2000
5000
NA
1000
150000
1000000000
3
2000
5000
IPSG M2PA and M3UA Configuration Procedures
856