Tekelec IP7 Secure Gateway Administration Manual page 709

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 8
Was an IP
route removed on
Sheets 3 or 4?
Perform the "Adding an IP
Route" procedure and add
the IP route back to the
database
Perform the Changing the Attributes
of an IPSG Association" procedure in
this chapter to change the open
parameter value to yes.
Sheet 9 of 9
Figure 94: Configuring an IP Link
910-6278-001 Revision A, January 2012
No
Yes
Was the open
Yes
parameter value changed for
an association on Sheet 6?
No
Enter the
chg-db:action=backup:dest=fixed
command
IPSG M2PA and M3UA Configuration Procedures
709