Tekelec IP7 Secure Gateway Administration Manual page 551

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command
Select an association to
change whose adapter value
is M3UA or SUA.
Does the card
containing the association that
will be changed, contain any
SUA associations?
No
Enter the rtrv-card command
with this parameter:
:loc = <the location of the card containing
the association that will be changed,
whose adapter value is M3UA, shown in
the rtrv-assoc output>
Is the IPSG
application is assigned
to the card?
Perform the "Changing the
Host Values of an IPSG
Association" procedure in
Chapter 6 to change the
attributes of the association.
Sheet 1 of 6
910-6278-001 Revision A, January 2012
value of the open
Yes
Enter the chg-assoc command
with these parameters.
:aname=<name of the
association being changed>
No
Yes
association the only action to
Enter the chg-assoc command with these
:aname=<name of the association being
IETF M3UA and SUA Configuration Procedures
What is the
No
parameter?
Yes
Enter the rtrv-assoc command
:aname=<name of the
association being changed>
:open=no
Does the
No
M3UA or SUA
association contain an
ALHOST value?
Yes
Is removing the
ALHOST value from this
No
be performed in this
procedure?
Yes
parameters:
changed>
:alhost=none
with this parameter:
To
Sheet 2
To
Sheet 5
551