Figure 108: Removing An Ipsg Association - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
What is the value of
the open parameter?
Sheet 2 of 2

Figure 108: Removing an IPSG Association

910-6278-001 Revision A, January 2012
Enter the chg-assoc command with
Yes
:aname=<the name of the
association that is being removed>
No
Enter the dlt-assoc command
:aname = <name of the association
that is being removed>
Enter the rtrv-assoc command with
:aname = <association name
specified in the dlt-assoc command>
chg-db:action=backup:dest=fixed
IPSG M2PA and M3UA Configuration Procedures
these parameters:
:open=no
with this parameter:
this parameter:
Enter the
command
839