Tekelec IP7 Secure Gateway Administration Manual page 903

Database Administration Manual - IP7 Secure
Gateway
-------------------------------------------------------------------------
Command Completed.
If linksets are displayed in the rept-stat-iptps output, continue the procedure with
If linksets are not displayed in the rept-stat-iptps output, perform one or more of these actions
to increase the available TPS.
Note: If one or more of these actions are not performed to increase the available TPS and the
available TPS will not allow the IPSG M3UA linkset to be changed, the IPSG M3UA linkset cannot
be added and the remainder of this procedure cannot be performed.
An IPLIMx card that contains signaling links has to be removed. To perform this action, continue
the procedure with
Some ATM high-speed signaling links have to be removed. To perform this action, continue
the procedure with
If you do not wish to perform other actions to increase the available TPS and the available TPS will
allow the IPSG M3UA linkset to be changed, continue the procedure with
10. Display the attributes of the linksets shown in
name of the linkset shown in
For this example enter these commands.
rtrv-ls:lsn=ipgwx1
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0
LSN
ipgwx1
---------------- -----------
RANDSLS
off
IPSG
no
MATELSN
---------- 32000
LOC
1101 A
1102 A
1103 A
1104 A
1105 A
1106 A
1107 A
1108 A
Link set table is (8 of 1024) 1% full.
rtrv-ls:lsn=ipgwx2
910-6278-001 Revision A, January 2012
Step 8.
Step 7.
Step 9.
APCA (SS7) SCRN SET SET BEI LST LNKS ACT MES DIS SLSCI NIS
001-001-002 none 1
SPCA CLLI
IPGWAPC GTTMODE
yes CdPA
IPTPS LSUSEALM
100%
LINK SLC TYPE
0 SS7IPGW
1 SS7IPGW
2 SS7IPGW
3 SS7IPGW
4 SS7IPGW
5 SS7IPGW
6 SS7IPGW
7 SS7IPGW
IPSG M2PA and M3UA Configuration Procedures
RCV: 312 450
Step 9 by entering the rtrv-ls command with the
L3T SLT
1 no A 8
TFATCABMLQ MTPRSE ASL8
4
CGGTMOD
no
SLKUSEALM
80%
10-07-19 09:49:19
Step 12.
GWS GWS GWS
off off off no
--- no
Step 10.
off
903