Tekelec IP7 Secure Gateway Administration Manual page 669

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 3
Yes
To
Sheet 3
Sheet 4 of 5
910-6278-001 Revision A, January 2012
Enter the rept-stat-iptps
command.
Are any linksets
No
shown with the value
yes in the IPGWAPC
column?
Yes
Change the IP TPS
values of some or all the
existing IPGWx linksets
shown in the rtrv-ls
output by performing the
Configuring an IPGWx
Linkset" procedure.
Change the MAXSLKTPS
values of the IPSG linksets
(and RSVDSLKTPS values if
necessary) of some or all of
the IPSG linkset shown in the
rtrv-ls output by performing
one of these procedures as
necessary.
Changing an IPSG M2PA
Linkset"
Changing an IPSG M3UA
Linkset"
Do you wish
to perform other
actions?
No
To
Sheet 5
IPSG M2PA and M3UA Configuration Procedures
Are any
linksets shown in
the rept-stat-iptps
output?
Yes
Enter the rtrv-ls command
with this parameter.
:lsn=<linkset name shown in
the rept-stat-iptps output>
Repeat this step for each
linkset shown in the
rept-stat-iptps output.
Are any
No
linksets shown with
the value yes in the
IPSG column?
Yes
Do you
wish to change
Yes
the MAXSLKTPS
values on any of
the IPSG
linksets?
No
No
669