Tekelec IP7 Secure Gateway Administration Manual page 829

Database Administration Manual - IP7 Secure
Gateway
These messages should appear, the active Maintenance and Administration Subsystem Processor
(MASP) appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Enter the rtrv-ip-host
command with this
parameter.
:display=all
Enter the rtrv-ip-lnk
command
Enter the rtrv-card
command
Select an IP host that is
assigned to an IPSG
card.
Sheet 1 of 2
910-6278-001 Revision A, January 2012
Remote Host
Is the host
name shown a local
host name or a remote
host name?
Local Host
Name
Enter the rtrv-assoc
command with this
parameter:
:lhost=<host name being
removed in this procedure>
Are associations
Yes
displayed in the
rtrv-assoc output?
No
Enter the dlt-ip-host command
with this parameter:
:host = <hostname being
removed>
Enter the rtrv-ip-host
command with this parameter:
:host = <hostname specified
in the dlt-ip-host command>
Enter the
chg-db:action=backup:dest=fixed
command
IPSG M2PA and M3UA Configuration Procedures
Name
To
Sheet 2
829