Removing An Association From An Application Server; Figure 64: Removing A M3Ua Or Sua Association - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command
Enter the
rtrv-as command with this
parameter:
:aname=<name of the association
being removed in this procedure>
Is the association
assigned to any
application servers?
Enter the rtrv-assoc command with
this parameter:
:aname = <association name
specified in the dlt-assoc command>
Enter the
chg-db:action=backup:dest=fixed
command

Figure 64: Removing a M3UA or SUA Association

Removing an Association from an Application Server

This procedure is used remove an association from an application server using the dlt-as command.
910-6278-001 Revision A, January 2012
Is an M3UA
association being
removed?
SS7IPGW,
IPGWI
What application is
assigned to the card?
Perform the "Removing an
Association from an Application
Yes
Server" procedure in this chapter
and remove the association from
the application servers.
No
value of the open
Enter the dlt-assoc command
with this parameter:
:aname = <association name>
IETF M3UA and SUA Configuration Procedures
Yes
Enter the rtrv-card command
No
with this parameter:
:loc = <the location of the card
containing the M3UA association that is
shown in the rtrv-assoc output>
IPSG
Perform the "Removing an
IPSG Association"
procedure in Chapter 6 to
remove the M3UA
association.
What is the
Yes
:aname=<the name of the
parameter?
M3UA or SUA association>
No
Enter the chg-assoc
command with these
parameters:
:open=no
490