Tekelec IP7 Secure Gateway Administration Manual page 564

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-assoc
command
Enter the rtrv-assoc command with this
:aname=<the name of the M3UA or SUA
association that is being changed>
pass:loc=<card location of the
association that is being changed>
:cmd="ping <remote host name>"
command several times and ping the
remote host (the RHOST value in the
previous step) to determine the
expected round trip time.
Do the retransmission
parameter values need to
Perform the "Changing the Attributes
of an M3UA or SUA Association"
procedure in this chapter and change
the retransmission parameters based
on the results of pinging the remote
Sheet 1 of 2
910-6278-001 Revision A, January 2012
Is an M3UA
association being
changed?
parameter:
Enter the
No
be changed?
Yes
host
IETF M3UA and SUA Configuration Procedures
Enter the rtrv-card command
with this parameter:
Yes
:loc = <the location of the card
containing the M3UA association
that will be changed, shown in the
rtrv-assoc output>
No
Is the IPSG
No
application is assigned
to the card?
Perform the "Configuring an IPSG
Association for SCTP Retransmission
Control" procedure in Chapter 6 to
configure the SCTP retransmission
control for the association.
This procedure is
finished
To
Sheet 2
Yes
564