Tekelec IP7 Secure Gateway Administration Manual page 283

Database Administration Manual - IP7 Secure
Gateway
If you do not wish to perform other actions to increase the available TPS and the available TPS will
allow the IPGWx linkset to be added, continue the procedure with
4. Display the IPGWx and IPSG linksets by entering this command.
rept-stat-iptps
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0
IP TPS USAGE REPORT
THRESH
-------------------------------------------------------------------------
LSN
ipgwx1105
ipgwx1
ipgwx2
ipgwx3
ipsglsn
ipsglsn2
-------------------------------------------------------------------------
Command Completed.
If linksets are displayed in the rept-stat-iptps output, continue the procedure with
If linksets are not displayed in the rept-stat-iptps output, perform one or more of these actions
to increase the available TPS.
Note: If one or more of these actions are not performed to increase the available TPS and the
available TPS will not allow the IPGWx linkset to be added, the IPGWx linkset cannot be added
and the remainder of this procedure cannot be performed.
An IPLIMx card that contains signaling links has to be removed. To perform this action, continue
the procedure with
Some ATM high-speed signaling links have to be removed. To perform this action, continue
the procedure with
If you do not wish to perform other actions to increase the available TPS and the available TPS will
allow the IPGWx linkset to be added, continue the procedure with
5. Display the attributes of the linksets shown in
name of the linkset shown in
linkset does not need to be displayed in this step.
For this example enter these commands.
rtrv-ls:lsn=ipgwx1
This is an example of the possible output.
rlghncxa03w 10-07-19 21:16:37 GMT EAGLE5 42.0.0
910-6278-001 Revision A, January 2012
CONFIG/ CONFIG/
RSVD
70% ---- 10000
100% ---- 32000
100% ---- 16000
100% ---- 32000
100% 600 24000
100% 600 4000
Step 3.
Step 2.
Step 4. If an existing IPGWx linkset is being changed in
IETF M3UA and SUA Configuration Procedures
TPS PEAK
MAX
TX: 3700 4000
RCV: 3650 4000
TX: 3700 4000
RCV: 3650 4000
TX: 4800 5000
RCV: 4850 5000
TX: 427
RCV: 312
TX: 4800 5000
RCV: 4800 5000
TX: 427
RCV: 312
Step 4 by entering the rtrv-ls command with the
L3T SLT
Step 7.
PEAKTIMESTAMP
10-07-19 09:49:19
10-07-19 09:49:19
10-07-19 09:49:19
10-07-19 09:49:19
10-07-19 09:49:09
10-07-19 09:49:09
550 10-07-19 09:49:19
450 10-07-19 09:49:19
10-07-19 09:49:19
10-07-19 09:49:19
550 10-07-19 09:49:19
450 10-07-19 09:49:19
Step 7.
Step
GWS GWS GWS
Step 5.
20, that
283