Tekelec IP7 Secure Gateway Administration Manual page 854

Database Administration Manual - IP7 Secure
Gateway
From
Sheet 1
Place out of service any in-service IP
connections on the IPSG M3UA signaling link
being removed.
Have the far-end node for the signaling link
place the M3UA associations in either the
ASP-INACTIVE or ASP-DOWN states.
Is the host name
assigned to any inservice
or open associations?
Enter the chg-assoc
:aname=<association name>
:open=no:alw=no command
Repeat this step for all
associations shown in the
rtrv-assoc output whose open or
alw parameter values are yes.
Sheet 2 of 3
910-6278-001 Revision A, January 2012
No
Yes
Enter the dact-slk command with
:loc=<location of the signaling link>
:link=<signaling link being
Enter the rept-stat-slk command
:loc=<location of the signaling link>
:link=<signaling link being
IPSG M2PA and M3UA Configuration Procedures
these parameters:
removed>
with these parameters:
removed>
To
Sheet 3
854