Tekelec IP7 Secure Gateway Administration Manual page 604

Database Administration Manual - IP7 Secure
Gateway
Enter the rtrv-card command. Record the
card locations and signaling link information
for all cards running the SS7IPGW and
From
Sheet 4
Enter the rtrv-assoc command with this
:lhost = <the local host name (from the
rtrv-ip-host output) whose IP address is
associated with the card location of the
signaling link (from the rtrv-ip-lnk output)
specified in the pass command>
Enter this command for each
association assigned to the card.
pass:loc=<location of the card
running the SS7IPGW or IPGWI
application>:cmd="msucount -a
At the IP near end node, disconnect
all associations attached to the card
specified in the pass command.
At the EAGLE 5 ISS, enter the dact-slk
command with these parameters:
:loc = <location of a card specified in the
Sheet 1 of 4
910-6278-001 Revision A, January 2012
Enter the rtrv-sg-opts
command
IPGWI applications.
Have the IP near end node stop all
traffic to one of the cards running the
SS7IPGW or IPGWI applications on
the EAGLE 5 ISS.
At the EAGLE 5 ISS, enter this
command.
pass:loc=<location of the card
running the SS7IPGW or IPGWI
application>:cmd="msucount -l"
parameter:
<association name>"
pass command>
:link=a
IETF M3UA and SUA Configuration Procedures
Enter the rtrv-ip-lnk
command
Enter the rtrv-ip-host
command with this
parameter.
:display=all
To
Sheet 2
604