Tekelec IP7 Secure Gateway Administration Manual page 805

Database Administration Manual - IP7 Secure
Gateway
9. Back up the new changes using the chg-db:action=backup:dest=fixed command. These
messages should appear, the active Maintenance and Administration Subsystem Processor (MASP)
appears first.
BACKUP (FIXED) : MASP A - Backup starts on active MASP.
BACKUP (FIXED) : MASP A - Backup on active MASP to fixed disk complete.
BACKUP (FIXED) : MASP A - Backup starts on standby MASP.
BACKUP (FIXED) : MASP A - Backup on standby MASP to fixed disk complete.
Enter the rtrv-ctrl-feat
command
Is the Large MSU
Support for IP Signaling
feature enabled?
Is the status
of the Large MSU
Support for IP Signaling
feature on
or off?
Enter the
chg-ctrl-feat command with these
parameters:
:partnum=893018401
:status=on
Enter the rtrv-ctrl-feat command
with this parameter:
:partnum=893018401
Enter the
chg-db:action=backup:dest=fixed
command
910-6278-001 Revision A, January 2012
No
To
Sheet 2
Yes
The Large MSU Support for IP
On
Signaling feature is enabled and
turned on. No further action is
Off
IPSG M2PA and M3UA Configuration Procedures
necessary.
805