Tekelec IP7 Secure Gateway Administration Manual page 202

Database Administration Manual - IP7 Secure
Gateway
Note: The bufsize value must be greater than or equal to
the cwmin value.
The cwmin value is the number of bytes specified for the
size of the association's congestion window. The bufsize
value is the number of kilobytes specified for the size of
the association's buffer .
To determine whether or not the bufsize value is greater
than or equal to the cwmin value, perform one of these
actions:
Sheet 3 of 4
910-6278-001 Revision A, January 2012
From
Sheet 2
Is the new bufsize
value greater than or equal to
the cwmin parameter value?
(See the Note)
Yes
Enter the chg-assoc command with these
parameters:
:aname=<name of the association being
changed>
:bufsize=<8 400>
Was the value of
the open parameter
changed on Sheet 1?
No
Multiply the bufsize value by 1024
Divide the cwmin value by 1024.
IETF M2PA Configuration Procedures
Either choose another value for
the bufsize parameter that is
greater than or equal to the
No
cwmin value, or change the
cwmin value by performing the
Changing the Attributes of an
M2PA Association" procedure .
Enter the chg-assoc
command with these
Yes
parameters.
:aname=<association
name being changed>
:open=yes
Enter the rtrv-assoc
command with this
parameter.
:aname=<association
name specified with the
chg-assoc command>
Enter the
chg-db:action=backup:dest=fixed
command
To
Sheet 4
202