Changing Ietf M3Ua And Sua Components; Changing Ip Options - Tekelec IP7 Secure Gateway Administration Manual

Database Administration Manual - IP7 Secure
Gateway

Changing IETF M3UA and SUA Components

This section describes how to change the attributes of the following components in the database.
IP Options – Perform the
An M3UA or SUA Association – Perform these procedures.
Changing the Attributes of a M3UA or SUA Association
Changing the Buffer Size of a M3UA or SUA Association
Changing the Host Values of a M3UA or SUA Association
The SCTP Retransmission Parameters – Perform the
for M3UA and SUA Associations
An Application Server – Perform the
CIC Values in a Routing Key – Perform the
Containing an Application Server
Routing Context Values in a Routing Key – Perform the
Existing Routing Key
The SCTP Checksum Algorithm – Perform the
M3UA and SUA Associations
A UA Parameter Set – Perform the
Turn off the Large MSU Support for IP Signaling feature – Perform the
Support for IP Signaling Feature

Changing IP Options

Use this procedure to change the IP options defined by these parameters: getcomm, setcomm,
snmpcont, srkq, trapcomm, ipgwabate, and uameasusedftas.
The chg-sg-opts command also contains the sctpcsum parameter. Perform the one of these
procedures to change the sctpcsum parameter value.
Changing the SCTP Checksum Algorithm Option for M3UA and SUA Associations
Changing the SCTP Checksum Algorithm Option for M2PA Associations
Changing the SCTP Checksum Algorithm Option for IPSG M2PA Associations
Changing the SCTP Checksum Algorithm Option for IPSG M3UA Associations
:getcomm – The community name used to validate SNMP Get and GetNext requests. This value applies
to each IP card SNMP agent.
:setcomm – The community name used to validate SNMP Set requests. This value applies to each IP
card SNMP agent.
:snmpcont – The system contact information for each IP card SNMP agent, used to define the sysContact
object in the SNMP MIB II System Group.
:srkq – The static routing key quantity used to specify the maximum number of static routing key
entries in the Routing Key table of each ss7ipgw and ipgwi card.
910-6278-001 Revision A, January 2012
Changing IP Options
procedure.
Changing an Application Server
procedure.
procedure.
procedure.
Changing a UA Parameter Set
Offprocedure.
IETF M3UA and SUA Configuration Procedures
procedure.
Changing the SCTP Checksum Algorithm Option
Changing the CIC Values in an Existing Routing Key
Changing the Routing Context Value in an
Changing the SCTP Checksum Algorithm Option for
procedure.
procedure.
Turning the Large MSU
508